A short pull for wardrobes, joinery and cabinet fronts, finish-matched to the door range.
- Material
- Brass, Stainless Steel, Zinc Alloy, Aluminium
- Finishes
- Matte BlackAntique BrassSatin BrassSatin Stainless SteelRose Gold+1
DrawingProduct photography pending — technical elevation shown
Door Knobs
Dome Cabinet Knob
SKU BSC-DK-405
A small domed knob for wardrobes, drawers and joinery, finish-matched to door hardware.
- Materials
- Brass, Zinc Alloy, Stainless Steel
- Finishes
- 6 options
- Door types
- Wardrobe & Joinery
- Availability
- CustomisableOEM / private label
Prices are not published because they depend on material, finish, quantity, packaging, customisation and delivery terms. Send your requirement for a specific quotation.
Overview
About this product
The Dome is a small knob for joinery and cabinet fronts. Contractors specify it so cabinet hardware in an apartment matches the door hardware rather than being sourced separately at the end of a project.
It is produced in the same finishes as our lever and knob ranges.
Specification
| Knob type | Cabinet and drawer knob |
|---|---|
| Knob diameter | 28 / 32 / 38 mm |
| Projection | 30 mm |
| Fixing | M4 machine screw, supplied |
| Base | Integral, no separate rose |
To confirmSpecifications shown are indicative. Exact dimensions, options and packing are confirmed against your requirement at the time of quotation.
Commercial terms
| Minimum order quantity | Available on request |
|---|---|
| Production lead time | Based on order quantity, finish and packing |
| Packaging | Individually poly-bagged with fixings, packed in printed inner boxes and export-grade master cartons. Buyer-specific inner boxes, labelling and barcodes can be produced. |
Warranty & compliance
Warranty terms are confirmed in writing at the time of order and vary by product, material, finish and application.
Testing and compliance documents are provided according to product type and buyer requirements. We do not display certification marks that have not been obtained — tell us what your market requires and we will confirm what can be arranged.
What is included
- Knob
- M4 fixing screw
Customisation options
- Diameter and projection to joinery drawing
- Knurled or fluted face
- Bulk packing for joinery workshops
- Buyer branding on the base
Recommended applications
Technical documentation
Dimensioned drawings and a per-product data sheet are prepared against your specification and sent with the quotation.
Related Products
Specified alongside this product
Items that are usually quoted together, so a door schedule arrives complete and finish-matched.
A cylindrical knob with a flat face, for contemporary interiors and joinery.
- Material
- Brass, Stainless Steel, Zinc Alloy
- Finishes
- Matte BlackSatin BrassSatin Stainless SteelAntique BrassSatin Nickel
A wall or door hook finished to match the hardware package.
- Material
- Brass, Stainless Steel, Zinc Alloy
- Finishes
- Antique BrassMatte BlackSatin Stainless SteelSatin BrassRose Gold
Accessories
Finish the door schedule
The last ten percent of a schedule is usually accessories — and it is where projects most often run short.
A wide-angle door viewer finished to match the entrance hardware.
- Material
- Brass, Zinc Alloy
- Finishes
- Antique BrassSatin Stainless SteelMatte BlackSatin BrassChrome
A door safety chain for apartment entrance doors.
- Material
- Brass, Zinc Alloy, Stainless Steel
- Finishes
- Antique BrassSatin Stainless SteelMatte BlackChromeSatin Brass
Door numerals and letters, finish-matched across a whole tower.
- Material
- Brass, Stainless Steel, Zinc Alloy
- Finishes
- Antique BrassSatin Stainless SteelMatte BlackSatin BrassPolished Brass
Product Questions
Frequently Asked Questions
In most cases yes. Send a physical sample of the finish you need to match. We produce a finish sample for your approval, and the approved sample becomes the production reference for the whole order.
Yes, subject to a feasibility review. Share the drawing or a physical sample and we will confirm what is producible, what needs adjustment, and whether any tooling is required before you commit.
MOQ depends on the product, material, finish and whether the item is standard or customised. It is confirmed with your quotation rather than applied as one blanket figure.
Yes. Samples are an ordinary part of the process, particularly for finish approval. Request samples through the enquiry form or the sample request on any product page.
Request Dome Cabinet Knob for your project or programme
Tell us the quantity, finish and delivery schedule. We will confirm the specification, arrange samples for approval and quote against your requirement.